Netcomm NF20MESH | Buddy Telco Help Centre

Make sure your Netcomm is plugged into a power outlet and switched on.
FTTC, FTTP, and HFC connections: run an ethernet cable from the red 'WAN' port to the correct port on your NBN connection box:
- FTTP: the UNI-D port as described in your onboarding email.
- FTTC: the 'GATEWAY' port.
- HFC: the 'UNI-D1' port.
FTTN and FTTB connections: run a phone cable from the grey 'DSL' port on the Netcomm to a phone port in the wall.
Connect your computer to the Wi-Fi network of the Netcomm device. You can find the Wi-Fi name and password on the sticker on the bottom of the device.
Open a web browser like Google Chrome or Firefox. Enter the code 192.168.20.1 in the web address bar and press enter.
A login page will appear. Enter the username and password on the sticker of the Netcomm device. This is different to the Wi-Fi name and password.
Click on RUN QUICK START WIZARD at the top of the page.
Select the following settings:
For FTTC, FTTP, and HFC connections:
- INTERNET SERVICE: Ethernet WAN
- CONNECTION TYPE: Dynamic IP
- Leave the others as they are.
For FTTN and FTTB connections:
- INTERNET SERVICE: VDSL
- CONNECTION TYPE: Dynamic IP
- Leave the others as they are.
Select Next.
Here, you can change the optional settings like the Wi-Fi password or time zone. Otherwise select Next until your reach the 'SUMMARY' page.
Select Finish.
Check for an internet connection.